menu
Kontakt
Kontakt

Produkty

Archiwum

Węzeł optyczny COMMSCOPE NC2000

1.2GHz 1x1, 1x2 and 2x2 Segmentable Nodes – HFC, Fiber Deep or Remote PHY

Węzeł optyczny COMMSCOPE NC2000
Najedź kursorem, aby przybliżyć
Węzeł optyczny COMMSCOPE NC2000
Opis
Specyfikacja techniczna
Do pobrania
Usługi

Opis produktu Węzeł optyczny COMMSCOPE NC2000

The NC2000 Optical Node Platform is designed for various applications in either HFC or fiber deep architectures. With its bottom entry fiber port and three coaxial output ports, the node's modular design features high RF output levels and 2x2 segmentation, and can be wall or pedestal mounted as needed. Available options include alternate route switching, third output via plug-in splitter, and automatic gain control.

The NC2000 includes an RF module and three module slots that can be populated according to network architecture requirements – flexibility being a key feature of this node. Two of these slots are most commonly used for a forward receiver and a digital return module, with the third slot commonly used for forward path redundancy or segmentation. The node can also be populated with other single-slot ARRIS node modules such as an optical switch, EDFA, or a DWDM transponder, optimizing performance and reliability for a wide range of applications.

The platform can be equipped with plug-in digital return path transceivers and, when configured with user-selectable plug-in SFP modules, supports wavelengths of 1310 nm, 1550 nm, or CWDM or DWDM. Alternatively, a DT4000 series "2-fer" transceiver can accept dual RF inputs for two independent segments and a user-selectable SFP module to support any of the same wavelengths.

The NC2000 includes ARRIS's integrated monitoring and management system, eliminating the need for costly status monitoring transponders and the allocation of forward and return bandwidth for the transponder's communicating frequencies.

The technical advantages of these NC2000 series platforms include an extensive offering of plug-in node modules and ARRIS's plug and play digital return technology. The many benefits of an extensive and user-friendly collection of modules include the fact that all modules are hot-swappable without splicing, operators can add access services capability by plugging in R-PHY, PON or Ethernet transport modules, monitoring is provided with an integrated network management plug-in without the added cost of a third-party status-monitoring transponder, forward paths can be configured for redundant, segmented, or BC/NC operation, and nodes can be populated with the industry's widest range of field optical passives families: couplers, splitters, filters and muxes/demuxes.

  • Low-profile housing design
  • Bottom entry ports for vertical mounting
  • Strand (traditional) or pedestal/wall/underground mount
  • 120/220 VAC Mains plug-in AC powering option
  • 1x2 and 2x2 segmentable configurations
  • Also available in power-saving 1x1 configuration
  • High-level outputs:
    • 60 dBmV (118 dBµV) at 1.2 GHz
  • Third RF output port enabled with splitter
  • Forward path redundancy with RF switching in applications with 1x2 configuration
  • Digital return technology with integrated SNMP monitoring and management
    • Simplified link alignment
    • Two return segments on a single wavelength
    • Daisy-chaining capability for added savings
    • Integrated status monitoring. No additional transponders needed
  • Multiple options for output level and slope
  • Return ingress switch options
  • Expansion slot available for optical switch, EDFA, forward receiver, DWDM transponder, Remote PHY or Node PON OLT
  • Enables DOCSIS 3.0 and 3.1
  • Supports VHub Configurations (RFoG, RFPON, and Light-Plex BC/NC)
  • Based on ARRIS's proven NC4000 platform, utilizing common modules and accessories

Specyfikacja techniczna

Transport Stream Interfacing

Input
  • 2x Electrical Ethernet (100/1000BaseT)

Output
  • 2x Electrical Ethernet (100/1000BaseT)
  • Physical port redundancy with active-active and active-standby operation Multicast streaming
Management

Management
  • 2x Electrical Ethernet (100/1000BaseT) SNMP v1/v2/v3, for alarm traps
  • User management via web browser
  • Support for nCompass Control by MediaKind
Physical and Power

Dimensions (W x H x D)
  • 44.20 x 4.45 x 59.69 cm (17.40 x 1.75 x 23.5 inches)

Input Voltage
  • 100-240 VAC 50/60 Hz

Input Power
  • 50W (chassis only) up to 350W (depending on option modules fitted)
Environmental Conditions

Operating Temperature
  • -10°C to +50°C (14°F to 122°F)

Storage Temperature
  • -40°C to +85°C (-40°F to 185°F)

Relative Operating Humidity
  • 10% to 90% (non-condensing)
Compliance

Compliance
  • CE marked in accordance with EU Low Voltage and EMC Directives

EMC Compliance
  • EN55022, EN55024, AS/NZS3548, EN61000-3-2 and FCC CFR47 Part 15B Class A

Safety Compliance
  • EN60950, IE60950
Basic HD

AVP 2000
Configuration Pack (AVP2000/CP/HD
/BASIC)
  • Composite video input
  • SD/HD MPEG-2 Encoding
  • SD and HD MPEG-4 AVC Encoding
  • Analogue audio inputs
  • 2 x 0 of MPEG-1 Layer II audio encode
  • ASI Output (2 outputs) with Remux
  • BISS Encryption
  • SMPTE 2022 Forward Error Correction

Six slot single PSU chassis (AVP 2000
/BAS/1AC/A)
  • Integrated redundant IP
  • Fully functional front panel control including video confidence

Encoder Module (CE/
HWO/CE-xA/A) ASI I/O
Module (CE/HWO/ASI/
IO/A)
  • 3G/HD/SD-SDI video input
  • Composite video input
  • Analogue audio inputs
  • Embedded (SDI) and AES digital audio inputs
  • SD MPEG-2 4:2:0 8 Bit video encoding
  • SD MPEG-4 4:2:0 8 Bit video encoding
  • HD video encoding (AVP/SWO/VP/x/HD)
  • 2 stereo pairs of MPEG-1 Layer II audio encoding
HD 4:2:2

AVP 2000 Configuration Pack (AVP2000/CP/HD/422)

As BASIC HD but adds:

  • 4:2:2 10 bit video encoding. (MPEG-2 & MPEG-4)
  • MediaKind’s Phase Aligned Audio (1 Group)

As above plus:

  • 4:2:2 10 Bit Encoding (AVP/SWO/VP/x/CONT)
  • 2 x 2.0 of MPEG-1 Layer II audio encoding (giving 6 in total) (CE/SWO/VP/CONT/AUDIO)
  • MediaKind’s Phase Aligned Audio (5.1) (CE/SWO/VP/CONT/AUDIO)
Premium 4:2:2

AVP 2000 Configuration Pack (AVP2000/CP/PREM/
422)

As HD 4:2:2 but adds:

  • Dual AC PSU chassis
  • 2 more 2.0 of MPEG-1 Layer II audio en- code
  • Additional Phase Aligned Audio licenses
  • 3 stereo pairs Dolby Digital audio encode
  • 1080p50/60 license
  • Stripe Refresh for Low Latency

As above plus:

Six slot Dual PSU chassis (AVP 2000/BAS/2ACFL/A) in place of six slot single PSU chassis (AVP 2000/BAS/1AC/A)

  • 2 x 2.0 of MPEG-1 Layer II audio encoding (giving 8 in total) (CE/SWO/VP/CONT/AUDIO)
  • Additional Phase Aligned Audio (5.1). (CE/SWO/VP/CONT/AUDIO)
  • 3 stereo pairs of Dolby Digital audio encoding (3 x CE/SWO/VP/DOLBY/AC3)
  • 1080p50/60 license & Stripe Refresh (AVP/UPS/VP/x/CONT/ADV)
Feature Matrix

n = Included

r = Field upgrade available

BASIC HD

HD 4:2:2

PREMIUM
4:2:2

Chassis

Single AC Power Supply

n

n

Dual AC Power Supply

n

Hot-Swappable Modules

n

n

n

Built-In Video Confidence Monitor

n

n

n
Baseband Video and Audio Inputs

Analog Composite CVBS Interface

n

n

n

SD-SDI Interface

n

n

n

HD-SDI Interface

n

n

n

3 Gbps Capable HD-SDI Interface

n

n

n

Discrete Digital Audio Inputs

n

n

n

Analog Audio Inputs

n

n

n
Video Encoding

MPEG-2 SD 4:2:0 Encoding

n

n

n

MPEG-2 HD 4:2:0 Encoding

n

n

n

MPEG-2 SD 4:2:2 Encoding

r

n

n

MPEG-2 HD 4:2:2 Encoding

r

n

n

MPEG-4 AVC SD 4:2:0 Encoding

n

n

n

MPEG-4 AVC HD 4:2:0 Encoding

n

n

n

MPEG-4 AVC SD 4:2:2 Encoding

r

n

n

MPEG-4 AVC HD 4:2:2 Encoding

r

n

n

MPEG-4 AVC Stripe Refresh (< 100 ms latency)

r

r

n

MPEG-4 AVC HD 4:2:2 1080p 50/60 fps

r

r

r

JPEG 2000 SD 4:2:2 Encoding

r

r

r

JPEG 2000 HD 4:2:2 Encoding

r

r

r
Audio Encoding

MPEG-1 Layer II Encode (Stereo Pairs)

r

r

r

Dolby® Digital (AC3) Encode (2.0 or 5.1)

r

r

r

AAC Encode Encode (2.0 or 5.1)

r

r

r

Phase Aligned Audio Encode (Groups)

r

r

r

Linear PCM Pass-Through

n

n

n

Dolby® Digital (AC3) Pass-Through (2.0 or 5.1)

n

n

n

Dolby® Digital Plus Pass-Through (2.0 or 5.1)

n

n

n

Dolby®E Pass-Through (Compressed)

n

n

n
Encryption

BISS Encryption (Modes 1 and E)

n

n

n
Transport Stream Outputs

IP Output

n

n

n

ASI Output

n

n

n

SMPTE 2022 FEC

n

n

n

G.703 Output

r

r

r
Control

Web Browser Control

n

n

n

Front Panel Control

n

n

n

SNMP Traps and Alarms

n

n

n

nCompass Control

n

n

n
Control

Video
  • 3G/HD/SD-SDI serial digital video with EDH error detection and health monitoring Analogue CVBS Input NTSC and PAL (PAL-M not supported)
  • Input Level 800 mV ptp ±10 percent Return loss >15 dB, 10 MHz to 270 MHz

Audio
  • Up to eight stereo pairs embedded on HD-SDI
  • Up to four stereo pairs via AES EBU (Connector via D-Type to XLR)
  • Supports both balanced (AES3) and unbalanced (AES3id) digital audio inputs 48 kHz sampling rate
  • 2 x Stereo Analogue Audio inputs (CE-xA only)

*Optional breakout cables can be ordered separately:- D-Type to balanced XLR breakout cable (VP/CAB/BAL)

D-Type to unbalanced BNC breakout cable (VP/CAB/UNBAL)

Video Encoder

Video Encoder
  • MPEG-4 AVC Main Profile @ Level 4.0 (1 Mbps to 20 Mbps) (CE/SWO/CE-x/H264)
  • MPEG-4 AVC High Profile @ Level 4.0 (1 Mbps to 25 Mbps) (CE/SWO/CE-x/264 + CE/SWO/CE-x/HD) MPEG-4 AVC 4:2:2 Profile @ Level 4.1 (1 Mbps to 80 Mbps) (CE/SWO/CE-x/264 + CE/SWO/CE-x/HD
  • + CE/SWO/CE-x/422)
  • MPEG-2 Video Main Profile @ Main Level (Base Card)
  • MPEG-2 Video Main Profile @ High Level (CE/SWO/CE-x/HD)
  • 1 Mbps to 80 Mbps bit-rate range (depends on profile/level supported) CABAC entropy encoding up to 62.5 Mbps
  • Manual CABAC switching-point override
  • Triple pass “Pixel Perfect” fully exhaustive motion estimation
  • Multiple low latency modes supporting delays down to <100ms* end-to-end delay (when used in conjunction with a RX8200 receiver)
  • *Configuration dependant.
Audio Encoder

Audio Encoder
  • Up to 8x stereo audio channel processing

MPEG-1 Layer II encoding standard
  • Encoding rates from 32 kbps to 384 kbps – up to 8 pair

Dolby® Digital (AC-3)
  • Pass-through of pre-encoded Dolby Digital, up to 8 streams

Dolby®E pass-through
  • Up to four streams

Linear PCM pass-through
  • Up to four independent stereo pairs

Phased Aligned Audio (PAA) (Patent Pending)
  • Encoding of 6 or 8 audio channels with time synchronous samples
Ancillary Data

Ancillary Data
  • SMPTE 334-1 Closed Captions SMPTE 2016-3 AFD and Bar Data
  • SMPTE 12-2 Time code extraction and carriage (ETSI TS101 154) SMPTE 2038 Generic VANC data extraction, up to 2 Mbps
IP Transport Stream Interfaces

Output
  • 2x Electrical Ethernet (100/1000BaseT)
  • Physical port redundancy with active-active and active-standby operation Multicast streaming
Management

Management
  • 2x Electrical Ethernet (100/1000BaseT) SNMP v1/v2/v3, for alarm traps
  • User management via Web browser Fully functional front panel control
Physical and Power

Dimensions (H x W x D)
  • 59.69 x 44.20 x 4.45 cm (23.50 x 17.40 x 1.75 inches)

Weight
  • 8.0 kg (17.6 lbs) unpopulated

Input Voltage
  • 100 VAC to 240 VAC 50/60 Hz

Input Power
  • 50 Watt (chassis only)
  • Up to 350 Watt (depending on option modules fitted)
Environmental Conditions

Operating Temperature
  • -10°C to +50°C (14°F to 122°F)

Storage Temperature
  • -40°C to +85°C (-40°F to 185°F)

Relative Operating Humidity
  • 10% to 90% (Non-condensing)
Compliance

Compliance
  • CE marked in accordance with EU Low Voltage and EMC Directives

EMC Compliance
  • EN55022, EN55024, AS/NZS3548, EN61000-3-2,EN61000-3-3 and FCC CFR47 Part 15B Class A

Safety Compliance
  • EN60950-1, IE60950-1, UL60950-1 and NRTL listed
Functions and Features

Application scenario
  • FTTC/B/D, FTTH, and FTTO/FTTM

Port quantity
  • 16

Port rate
  • Upstream: 1.244 Gbit/s
  • Downstream: 2.488 Gbit/s

Forwarding capability [Gbit/s]
  • 40 Gbit/s

Maximum number of MAC addresses
  • 131072

Maximum distance difference between 2 ONUs under the same PON port (board capability) [km]
  • 40km

Assured bandwidth per port [kbit/s]
  • 1238784 kbit/s

T-CONTs per port

  • 1024

Bandwidth per T-CONT
  • 1 Mbit/s (in the minimum delay mode)
  • 128 kbit/s (in the maximum bandwidth usage mode)

GEM ports per board
  • 16384

GEM ports per port
  • 3872

Service flows per board
  • 16368

Power budget of port
  • Class B+: (28 dB, most common)
  • Class C+: (32 dB, long reach transmission)
  • Class C++: 35 dB

1588v2 Synchronization
  • Y

9216-byte jumbo frames
  • Y

Bidirectional FEC
  • Y

Type B protection (single-homing)
  • Y

Type B protection (dual-homing)
  • Y

Type C protection (single-homing)
  • Y

Type C protection (dual-homing)

  • Y

HQoS
  • Y

NTP
  • Y

ONU-based shaping
  • Y

PON ISSU
  • Y

Y.1731 PM
  • Y

Security (Anti-DoS, Anti-MAC/IP Spoofing)
  • Y

Controlled optical signal transmission of the optical module
  • Y

Rogue ONU detection and isolation
  • Y

ONUs per port
  • 128

Automatic shutdown at high temperature
  • Y

Temperature query and high-temperature alarm
  • Y

Energy conservation for service boards
  • Y
Specification

Dimensions without packaging (H x W x D) [mm]
  • 399.20 mm x 23.30 mm x 257.90 mm

Weight without packaging [kg]
  • 0.78 kg

Static power consumption [W]
  • 21 W

Maximum power consumption [W]
  • 47 W

Operating temperature [°C]
  • -40°C to +65°C

Maximum Frame Size of Boards (Default) [bytes]
  • 2052 bytes

Maximum Frame Size of Boards (jumbo frame enabled) [bytes]
  • 9216 bytes

Maximum split ratio
  • 1: 128

SmartClass OLA-54

  • BN 2280/41 Multimode
  • BN 2280/41 Multimode

SmartClass OLA-55

  • BN 2280/01 Single-mode
  • BN 2280/21 Single-mode APC

Adjustable wavelength range
  • 750 to 1350 nm in 1 nm increments
  • 1260 to 1650 nm in 1 nm increments

Fiber type
  • 50/125 µm
  • 9/125 µm

Calibrated wavelengths
  • 850 nm, 1300 nm
  • 1310 nm, 1550 nm, 1625 nm

Display range(1)
  • <2.5 to 55 dB
  • 2.0 to 60 dB

Minimum insertion loss(1)
  • <2.5 dB
  • <2.0 dB

Linearity
  • ± 0.2
  • ± 0.2

Repeatability of attenuation setting(2)
  • ± 0.1 dB
  • ± 0.1 dB

Total attenuation accuracy(1)
  • typ. ± 0.8 dB
  • ± 0.8 dB

Setting type
  • Continuous over the entire range
  • Continuous over the entire range

Function
  • Bi-directional
  • Bi-directional

Displayed value(1)
  • Absolute or relative attenuation value
  • Absolute or relative attenuation value

Max. permitted level
  • +20 dBm
  • +23 dBm

Usługi

Oferta usług utrzymania systemów obejmuje 6 pakietów usług pomocy technicznej VECTOR TECH SOLUTIONS: V-AID Service / EW / NBD / NBD+EW / 24h / 24h+EW. Umożliwiają one wykorzystanie potencjału Firmy VECTOR w zakresie codziennego wsparcia technicznego, rozwiązywania problemów, szybkiego reagowania na problemy krytyczne w sieci oraz utrzymania systemu na najwyższym poziomie wydajności oraz planowania rozwoju sieci.

Więcej o usługach V-AID

    Zapytaj o

    Węzeł optyczny COMMSCOPE NC2000