menu
Kontakt
Kontakt

Produkty

Archiwum

ARRIS NC4000 Series Optical Nodes

1.2 GHz 4x4 Segmentable Nodes - Fiber Deep or HFC

ARRIS NC4000 Series Optical Nodes
Najedź kursorem, aby przybliżyć
ARRIS NC4000 Series Optical Nodes
Opis
Specyfikacja techniczna
Do pobrania
Produkty powiązane
Usługi

Opis produktu ARRIS NC4000 Series Optical Nodes

The ARRIS NC4000 series optical node platform supports a wide range of advanced architectures and is ideal for Fiber Deep and HFC applications. It is designed to provide the utmost reliability, flexibility, and adaptability in an outdoor optical node platform. With an ultra-high output level of up to 64 dBmV (at 1218 MHz) on each of the four RF ports of the OA4xxx RF Output Amplifier, the NC4000 can be used to extend the reach of the coax distribution network.

The flexible and rugged platform is 4x4 segmentable for HFC applications, and 2x2 segmentable in Fiber Deep applications. For the return path, this is achieved using the universal digital return transceiver, the DT4250, supporting multiple modes of operation, a single return ("1‐fer"), dual independent returns ("2‐ fer") or enhanced single return with increased performance and the option to cascade returns. Upstream transmission is enabled with plug-in SFP modules supporting 1310 nm, 1550 nm, and CWDM, or DWDM options, further expanding the deployment of advanced "bandwidth‐hungry" services into fiber‐poor areas while reducing real estate and powering requirements in the field.

The NC4000 supports deployment of a wide range of field‐hardened EDFAs and optical switches for extending fiber reach, routing options, and system reliability. Integrated remote monitoring is provided through the digital return transceiver with remote network management capability, eliminating the added cost of a third‐party status monitoring transponder. The NC4000 optical node platform also supports next‐generation architectures and technologies such as Node PON, Remote PHY, and more, providing a seamless migration to support tomorrow's services.

NC4000S4 Segmentable HFC Node

  • 1x1 to 4x4 segmentation
  • Supports 56 dBmV RF Output capability at 1218 MHz at 0 dBm Optical Input

NC4000H4 Fiber Deep Node

  • 1x1 to 2x2 segmentation
  • Supports 60.5 dBmV RF Output capability at 1218 MHz at 0 dBm Optical Input

NC4000H5 Fiber Deep Node

  • 1x1 to 2x2 segmentation
  • Supports 64 dBmV RF Output capability at 1218 MHz at 0 dBm Optical Input
  • Three alternative passband splits: 42/54 MHz, 65/85 MHz, and 85/102 MHz
  • Advanced Universal Digital Return via DT4250 Universal Digital Transmitter
    • Integrated status monitoring
    • Integrated Ethernet transport
    • Improved performance
    • Selectable segmentation and return bandwidth
    • 58 return laser options (SFPs)
  • Redundant power supplies, receivers, digital return transmitters, RF and Optical switches
  • Splice tray for optical passives
  • Six universal module slot positions for:
    • Forward receiver
    • Universal Digital Return (with integrated monitoring management)
    • Optical and/or RF switch
    • DCM
    • EDFA
    • RFoG
    • Node PON OLT

Specyfikacja techniczna

Transport Stream Interfacing

Input
  • 2x Electrical Ethernet (100/1000BaseT)

Output
  • 2x Electrical Ethernet (100/1000BaseT)
  • Physical port redundancy with active-active and active-standby operation Multicast streaming
Management

Management
  • 2x Electrical Ethernet (100/1000BaseT) SNMP v1/v2/v3, for alarm traps
  • User management via web browser
  • Support for nCompass Control by MediaKind
Physical and Power

Dimensions (W x H x D)
  • 44.20 x 4.45 x 59.69 cm (17.40 x 1.75 x 23.5 inches)

Input Voltage
  • 100-240 VAC 50/60 Hz

Input Power
  • 50W (chassis only) up to 350W (depending on option modules fitted)
Environmental Conditions

Operating Temperature
  • -10°C to +50°C (14°F to 122°F)

Storage Temperature
  • -40°C to +85°C (-40°F to 185°F)

Relative Operating Humidity
  • 10% to 90% (non-condensing)
Compliance

Compliance
  • CE marked in accordance with EU Low Voltage and EMC Directives

EMC Compliance
  • EN55022, EN55024, AS/NZS3548, EN61000-3-2 and FCC CFR47 Part 15B Class A

Safety Compliance
  • EN60950, IE60950
Basic HD

AVP 2000
Configuration Pack (AVP2000/CP/HD
/BASIC)
  • Composite video input
  • SD/HD MPEG-2 Encoding
  • SD and HD MPEG-4 AVC Encoding
  • Analogue audio inputs
  • 2 x 0 of MPEG-1 Layer II audio encode
  • ASI Output (2 outputs) with Remux
  • BISS Encryption
  • SMPTE 2022 Forward Error Correction

Six slot single PSU chassis (AVP 2000
/BAS/1AC/A)
  • Integrated redundant IP
  • Fully functional front panel control including video confidence

Encoder Module (CE/
HWO/CE-xA/A) ASI I/O
Module (CE/HWO/ASI/
IO/A)
  • 3G/HD/SD-SDI video input
  • Composite video input
  • Analogue audio inputs
  • Embedded (SDI) and AES digital audio inputs
  • SD MPEG-2 4:2:0 8 Bit video encoding
  • SD MPEG-4 4:2:0 8 Bit video encoding
  • HD video encoding (AVP/SWO/VP/x/HD)
  • 2 stereo pairs of MPEG-1 Layer II audio encoding
HD 4:2:2

AVP 2000 Configuration Pack (AVP2000/CP/HD/422)

As BASIC HD but adds:

  • 4:2:2 10 bit video encoding. (MPEG-2 & MPEG-4)
  • MediaKind’s Phase Aligned Audio (1 Group)

As above plus:

  • 4:2:2 10 Bit Encoding (AVP/SWO/VP/x/CONT)
  • 2 x 2.0 of MPEG-1 Layer II audio encoding (giving 6 in total) (CE/SWO/VP/CONT/AUDIO)
  • MediaKind’s Phase Aligned Audio (5.1) (CE/SWO/VP/CONT/AUDIO)
Premium 4:2:2

AVP 2000 Configuration Pack (AVP2000/CP/PREM/
422)

As HD 4:2:2 but adds:

  • Dual AC PSU chassis
  • 2 more 2.0 of MPEG-1 Layer II audio en- code
  • Additional Phase Aligned Audio licenses
  • 3 stereo pairs Dolby Digital audio encode
  • 1080p50/60 license
  • Stripe Refresh for Low Latency

As above plus:

Six slot Dual PSU chassis (AVP 2000/BAS/2ACFL/A) in place of six slot single PSU chassis (AVP 2000/BAS/1AC/A)

  • 2 x 2.0 of MPEG-1 Layer II audio encoding (giving 8 in total) (CE/SWO/VP/CONT/AUDIO)
  • Additional Phase Aligned Audio (5.1). (CE/SWO/VP/CONT/AUDIO)
  • 3 stereo pairs of Dolby Digital audio encoding (3 x CE/SWO/VP/DOLBY/AC3)
  • 1080p50/60 license & Stripe Refresh (AVP/UPS/VP/x/CONT/ADV)
Feature Matrix

n = Included

r = Field upgrade available

BASIC HD

HD 4:2:2

PREMIUM
4:2:2

Chassis

Single AC Power Supply

n

n

Dual AC Power Supply

n

Hot-Swappable Modules

n

n

n

Built-In Video Confidence Monitor

n

n

n
Baseband Video and Audio Inputs

Analog Composite CVBS Interface

n

n

n

SD-SDI Interface

n

n

n

HD-SDI Interface

n

n

n

3 Gbps Capable HD-SDI Interface

n

n

n

Discrete Digital Audio Inputs

n

n

n

Analog Audio Inputs

n

n

n
Video Encoding

MPEG-2 SD 4:2:0 Encoding

n

n

n

MPEG-2 HD 4:2:0 Encoding

n

n

n

MPEG-2 SD 4:2:2 Encoding

r

n

n

MPEG-2 HD 4:2:2 Encoding

r

n

n

MPEG-4 AVC SD 4:2:0 Encoding

n

n

n

MPEG-4 AVC HD 4:2:0 Encoding

n

n

n

MPEG-4 AVC SD 4:2:2 Encoding

r

n

n

MPEG-4 AVC HD 4:2:2 Encoding

r

n

n

MPEG-4 AVC Stripe Refresh (< 100 ms latency)

r

r

n

MPEG-4 AVC HD 4:2:2 1080p 50/60 fps

r

r

r

JPEG 2000 SD 4:2:2 Encoding

r

r

r

JPEG 2000 HD 4:2:2 Encoding

r

r

r
Audio Encoding

MPEG-1 Layer II Encode (Stereo Pairs)

r

r

r

Dolby® Digital (AC3) Encode (2.0 or 5.1)

r

r

r

AAC Encode Encode (2.0 or 5.1)

r

r

r

Phase Aligned Audio Encode (Groups)

r

r

r

Linear PCM Pass-Through

n

n

n

Dolby® Digital (AC3) Pass-Through (2.0 or 5.1)

n

n

n

Dolby® Digital Plus Pass-Through (2.0 or 5.1)

n

n

n

Dolby®E Pass-Through (Compressed)

n

n

n
Encryption

BISS Encryption (Modes 1 and E)

n

n

n
Transport Stream Outputs

IP Output

n

n

n

ASI Output

n

n

n

SMPTE 2022 FEC

n

n

n

G.703 Output

r

r

r
Control

Web Browser Control

n

n

n

Front Panel Control

n

n

n

SNMP Traps and Alarms

n

n

n

nCompass Control

n

n

n
Control

Video
  • 3G/HD/SD-SDI serial digital video with EDH error detection and health monitoring Analogue CVBS Input NTSC and PAL (PAL-M not supported)
  • Input Level 800 mV ptp ±10 percent Return loss >15 dB, 10 MHz to 270 MHz

Audio
  • Up to eight stereo pairs embedded on HD-SDI
  • Up to four stereo pairs via AES EBU (Connector via D-Type to XLR)
  • Supports both balanced (AES3) and unbalanced (AES3id) digital audio inputs 48 kHz sampling rate
  • 2 x Stereo Analogue Audio inputs (CE-xA only)

*Optional breakout cables can be ordered separately:- D-Type to balanced XLR breakout cable (VP/CAB/BAL)

D-Type to unbalanced BNC breakout cable (VP/CAB/UNBAL)

Video Encoder

Video Encoder
  • MPEG-4 AVC Main Profile @ Level 4.0 (1 Mbps to 20 Mbps) (CE/SWO/CE-x/H264)
  • MPEG-4 AVC High Profile @ Level 4.0 (1 Mbps to 25 Mbps) (CE/SWO/CE-x/264 + CE/SWO/CE-x/HD) MPEG-4 AVC 4:2:2 Profile @ Level 4.1 (1 Mbps to 80 Mbps) (CE/SWO/CE-x/264 + CE/SWO/CE-x/HD
  • + CE/SWO/CE-x/422)
  • MPEG-2 Video Main Profile @ Main Level (Base Card)
  • MPEG-2 Video Main Profile @ High Level (CE/SWO/CE-x/HD)
  • 1 Mbps to 80 Mbps bit-rate range (depends on profile/level supported) CABAC entropy encoding up to 62.5 Mbps
  • Manual CABAC switching-point override
  • Triple pass “Pixel Perfect” fully exhaustive motion estimation
  • Multiple low latency modes supporting delays down to <100ms* end-to-end delay (when used in conjunction with a RX8200 receiver)
  • *Configuration dependant.
Audio Encoder

Audio Encoder
  • Up to 8x stereo audio channel processing

MPEG-1 Layer II encoding standard
  • Encoding rates from 32 kbps to 384 kbps – up to 8 pair

Dolby® Digital (AC-3)
  • Pass-through of pre-encoded Dolby Digital, up to 8 streams

Dolby®E pass-through
  • Up to four streams

Linear PCM pass-through
  • Up to four independent stereo pairs

Phased Aligned Audio (PAA) (Patent Pending)
  • Encoding of 6 or 8 audio channels with time synchronous samples
Ancillary Data

Ancillary Data
  • SMPTE 334-1 Closed Captions SMPTE 2016-3 AFD and Bar Data
  • SMPTE 12-2 Time code extraction and carriage (ETSI TS101 154) SMPTE 2038 Generic VANC data extraction, up to 2 Mbps
IP Transport Stream Interfaces

Output
  • 2x Electrical Ethernet (100/1000BaseT)
  • Physical port redundancy with active-active and active-standby operation Multicast streaming
Management

Management
  • 2x Electrical Ethernet (100/1000BaseT) SNMP v1/v2/v3, for alarm traps
  • User management via Web browser Fully functional front panel control
Physical and Power

Dimensions (H x W x D)
  • 59.69 x 44.20 x 4.45 cm (23.50 x 17.40 x 1.75 inches)

Weight
  • 8.0 kg (17.6 lbs) unpopulated

Input Voltage
  • 100 VAC to 240 VAC 50/60 Hz

Input Power
  • 50 Watt (chassis only)
  • Up to 350 Watt (depending on option modules fitted)
Environmental Conditions

Operating Temperature
  • -10°C to +50°C (14°F to 122°F)

Storage Temperature
  • -40°C to +85°C (-40°F to 185°F)

Relative Operating Humidity
  • 10% to 90% (Non-condensing)
Compliance

Compliance
  • CE marked in accordance with EU Low Voltage and EMC Directives

EMC Compliance
  • EN55022, EN55024, AS/NZS3548, EN61000-3-2,EN61000-3-3 and FCC CFR47 Part 15B Class A

Safety Compliance
  • EN60950-1, IE60950-1, UL60950-1 and NRTL listed
Functions and Features

Application scenario
  • FTTC/B/D, FTTH, and FTTO/FTTM

Port quantity
  • 16

Port rate
  • Upstream: 1.244 Gbit/s
  • Downstream: 2.488 Gbit/s

Forwarding capability [Gbit/s]
  • 40 Gbit/s

Maximum number of MAC addresses
  • 131072

Maximum distance difference between 2 ONUs under the same PON port (board capability) [km]
  • 40km

Assured bandwidth per port [kbit/s]
  • 1238784 kbit/s

T-CONTs per port

  • 1024

Bandwidth per T-CONT
  • 1 Mbit/s (in the minimum delay mode)
  • 128 kbit/s (in the maximum bandwidth usage mode)

GEM ports per board
  • 16384

GEM ports per port
  • 3872

Service flows per board
  • 16368

Power budget of port
  • Class B+: (28 dB, most common)
  • Class C+: (32 dB, long reach transmission)
  • Class C++: 35 dB

1588v2 Synchronization
  • Y

9216-byte jumbo frames
  • Y

Bidirectional FEC
  • Y

Type B protection (single-homing)
  • Y

Type B protection (dual-homing)
  • Y

Type C protection (single-homing)
  • Y

Type C protection (dual-homing)

  • Y

HQoS
  • Y

NTP
  • Y

ONU-based shaping
  • Y

PON ISSU
  • Y

Y.1731 PM
  • Y

Security (Anti-DoS, Anti-MAC/IP Spoofing)
  • Y

Controlled optical signal transmission of the optical module
  • Y

Rogue ONU detection and isolation
  • Y

ONUs per port
  • 128

Automatic shutdown at high temperature
  • Y

Temperature query and high-temperature alarm
  • Y

Energy conservation for service boards
  • Y
Specification

Dimensions without packaging (H x W x D) [mm]
  • 399.20 mm x 23.30 mm x 257.90 mm

Weight without packaging [kg]
  • 0.78 kg

Static power consumption [W]
  • 21 W

Maximum power consumption [W]
  • 47 W

Operating temperature [°C]
  • -40°C to +65°C

Maximum Frame Size of Boards (Default) [bytes]
  • 2052 bytes

Maximum Frame Size of Boards (jumbo frame enabled) [bytes]
  • 9216 bytes

Maximum split ratio
  • 1: 128

SmartClass OLA-54

  • BN 2280/41 Multimode
  • BN 2280/41 Multimode

SmartClass OLA-55

  • BN 2280/01 Single-mode
  • BN 2280/21 Single-mode APC

Adjustable wavelength range
  • 750 to 1350 nm in 1 nm increments
  • 1260 to 1650 nm in 1 nm increments

Fiber type
  • 50/125 µm
  • 9/125 µm

Calibrated wavelengths
  • 850 nm, 1300 nm
  • 1310 nm, 1550 nm, 1625 nm

Display range(1)
  • <2.5 to 55 dB
  • 2.0 to 60 dB

Minimum insertion loss(1)
  • <2.5 dB
  • <2.0 dB

Linearity
  • ± 0.2
  • ± 0.2

Repeatability of attenuation setting(2)
  • ± 0.1 dB
  • ± 0.1 dB

Total attenuation accuracy(1)
  • typ. ± 0.8 dB
  • ± 0.8 dB

Setting type
  • Continuous over the entire range
  • Continuous over the entire range

Function
  • Bi-directional
  • Bi-directional

Displayed value(1)
  • Absolute or relative attenuation value
  • Absolute or relative attenuation value

Max. permitted level
  • +20 dBm
  • +23 dBm

Usługi

Oferta usług utrzymania systemów obejmuje 6 pakietów usług pomocy technicznej VECTOR TECH SOLUTIONS: V-AID Service / EW / NBD / NBD+EW / 24h / 24h+EW. Umożliwiają one wykorzystanie potencjału Firmy VECTOR w zakresie codziennego wsparcia technicznego, rozwiązywania problemów, szybkiego reagowania na problemy krytyczne w sieci oraz utrzymania systemu na najwyższym poziomie wydajności oraz planowania rozwoju sieci.

Więcej o usługach V-AID

    Zapytaj o

    ARRIS NC4000 Series Optical Nodes