MediaKind RX9500

Bulk Descrambler

    Zapytaj o

    MediaKind RX9500

    Opis produktu MediaKind RX9500

    MediaKind RX9500 Bulk Descrambler provides Cable, IPTV, and other Direct to Home operators with the capability to efficiently turn-around encrypted and free to air content from satellite platforms. The RX9500 allows operators to demodulate and descramble 10s or 100s of services from multiple satellite transponders within a high density, low rack unit occupancy solution.

    The RX9500 forms part of MediaKind’s Multi-Platform Headend Solution, interfacing seamlessly with MediaKind’s encoders and transcoders. The RX9500 Bulk Descrambler is simple to set up and configure offering the benefit of a single management, control and monitoring solution for the complete turn-around system through MediaKind’s nCompass management platform.

    Channel Density

    The RX9500 Bulk Descrambler allows operators to turn-around 10s or hundreds of satellite delivered services within a high density, low rack occupancy solution. The RX9500 can be configured to process up to 6 satellite multiplexes of scrambled or free to air content.

    RX9500 can also be equipped to descramble services presented on IP TS input.

    Common Interface Descrambling

    The RX9500 Bulk Descrambler is able to descramble services via DVB Common Interface modules ensuring that all frequently used CA systems can be addressed. The RX9500 allows two CAMs to be used per satellite multiplex—ensuring that a high density of services can be descrambled and allows for multiple CA systems on a transponder.

    Simple Architecture

    The RX9500 Bulk Descrambler exemplifies the benefits of a simple architecture. Each satellite multiplex is processed as siloed modules without dependency on other inputs. Each descrambled or FTA channel is output as an easy to manage single program transport stream on IP interfaces allowing the down-stream equipment to effectively process the services.

    One System, One Management Platform

    Through MediaKind’s Multi-Platform Headend Solution operators can deploy a complete content turn-around solution—where each element can seamlessly interface with the other elements; all monitored and controlled by nCompass, as a single

    overarching management platform.

    Why MediaKind

    The MediaKind RX9500 Bulk Descrambler provides all the necessary elements to acquire channel content for a DTH turn-around platform. More importantly the RX9500 forms part of a single, fully integrated, managed end-to-end system.

    Base Unit Features

    RX9500 – Bulk Descrambler Chassis (RX9500/BAS/CI/1AC)

    Base Chassis Functionality Includes:

    • 6x slot, single PSU chassis
    • Common Interface CA bulk descrambling
    • 2x Ethernet control ports
    • 2x GigE Ethernet IP Transport Stream outputs
    • Scrambled service pass-through
    • Web browser control and SNMP monitoring
    • Integration with nCompass Control

    RX9500 – Dual PSU Bulk Descrambler Chassis (RX9500/BAS/2ACFL/CI)

    • Dual PSU, flying lead chassis
    • 6x slots for descrambling cards

    Hardware Options

    The RX9500 Bulk Descrambler allows operators to equip and scale their unit for the density they require by fitting up to 6 satellite input/descrambler cards.

    Satellite input Common Interface descrambling card (RX9500/HWO/SAT/CI)

    • 1x satellite input
    • DVB-S capable
    • 2x DVB Common Interface Conditional Access Module slots
    • Up to 6 cards per chassis

    DVB-S2 Satellite input and IP TS Common Interface descrambling card (RX9500/HWO/SAT/S2/IP/CI)

    • 1x satellite input
    • DVB-S, DVB-S2 capable
    • MPEG transport stream over input IP
    • 2x 100/1000BaseT input (on chassis)
    • 2x DVB Common Interface Conditional Access Module slots
    • Up to 6 cards per chassis

     

    Specyfikacja techniczna

    Satellite Input

     

    Satellite Input and Descrambling module

    Connector: 1x F-Type (F), 75 Ohm

    LNB Power: 13V, 18V or off, 22 kHz on/off Modulation: DVB-S QPSK

    Standard: EN300 421

    Frequency range: 950 MHz to 2150 MHz Input level: -25 dBm to -65 dBm

    DVB-S Symbol rate: 1 Msyms to 45 Msyms DVB-S FEC: 1/2, 2/3, 3/4, 5/6, 7/8

     

     

     

    DVB-S2 Capability

    Standard: EN302 307

    DVB-S2 Symbol rate: 1 Msyms to 45Msyms Modulation: DVB-S2 QPSK

    FEC DVB-S2 QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10

    Modulation: DVB-S2 8PSK

    FEC, DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10

    DVB-S2 FEC frame: Short & Normal frames DVB-S2 Physical layer scrambling

     

    IP input Capability*

    Connector: 2x RJ45 (on chassis) Format: 100/1000BaseT

    Up to 2x MPTS Multicast inputs per module

     

    Conditional Access

     

     

     

     

    DVB Common Interface Multi-service Descrambling

    Free to Air service pass-through

    FTA PID Pass-through: 232 PIDs Max in addition to Descrambled services Descrambling of up to 128 services

    Pass-through all wanted services still encrypted Support for all major CAM modules

    Dual CAM support per card Descrambling of up to 8 services per CAM Descrambling of up to 64 PIDs per CAM

    Service pre-filtering on multiplexes >72Mbps

     

    Transport Stream Outputs

     

     

     

     

     

    IP Transport Stream Output

    Transport encapsulation into IP

    2x Electrical Ethernet (10/100/1000BaseT)

    Multiple Single Program Transport Stream as IP/UDP – CBR mode Multiple Single Program Transport Stream as IP/UDP—VBR Mode* Multi-Program Transport Stream per satellite multiplex as IP/UDP* Number of services per chassis: 196 Max

    Number of components per chassis: 1024 Max PCR Regeneration

    PAT, PMT, SDT regeneration PTS, DTS Pass-through

    *Check availability

    Management

    2x Electrical Ethernet (10/100/1000BaseT) User management via web browser

    Front panel keypad and LCD

    SNMP v1/v2/v3 for traps and alarms nCompass Support

     

    Physical and Power

    Dimensions (W x D x H)442.5 x 596.9 x 44mm (17.5“ x 23.5“ x 1.75“ approx.)
    Input Voltage100-240VAC 50/60Hz
     

    Power Consumption

    50W (Chassis only)

    28W Max. per descrambler card. Max 6 cards per chassis

    CoolingIntegrated fan

     

    Environmental Conditions

    Operating Temperature-10°C to +50°C (14°F to 122°F)
    Storage Temperature-40°C to +85°C F to 185°F) (-40°
    Relative Humidity5% to 90% (non-condensing)

     

    Compliance

    ComplianceCE marked in accordance with EU Low Voltage and EMC Directives
    EMC ComplianceEN55022, EN61000-3-2, EN61000-3-3, EN55024, CISPR22, FCC CFR47 Part 15B Class A
    Safety ComplianceEN60950-1, IEC60950-1, UL60950-1

    Inni przeczytali także: