The MX8400 revolutionizes IP multiplexing technology. Providing up to eight independent multiplexed transport streams from a single enclosure and with built-in support for DVB Common Scrambling Algorithm for content protection and BISS, MX8400 facilitates numerous system architectures.
Suitable for a wide range of multiplexing and re-multiplexing applications, it’s designed to offer system level redundancy and ease of operations. MX8400 is a feature rich product that also supports ASI input and output, SFN Adaptation, SMPTE 2022 Pro-MPEG FEC and Reflex™ Statistical Multiplexing. Fully integrated with nCompass management system, the MX8400 takes full advantage of the IP technology to provide a cost-effective, highly reliable and flexible solution. Dual hot swap PSUs are an option available for additional resilience.
The MX8400 is suitable for a wide range of multiplexing and re- multiplexing applications – including primary multiplexing in headends for DTH satellite, cable and terrestrial, contribution systems and re-multiplexing applications in central and regional headends.
MX8400 offers a unique design concept that offers up to eight independent multiplexed transport streams to reduce costs and simplify designs, enabling systems to grow as the need demands.
MediaKind’s Reflex Statistical Multiplexing is implemented to work over IP networks to provide the maximum utilization of available bit-rate. Supports both MPEG-2 SD and HD and MPEG-4 AVC SD and HD.
MX8400 offers a fully redundant architecture in combination with nCompass management system that enables implementation of cost effective and resilient system architectures; MX8400 supports redundant external clocks, Data, CA and Control ports. Support of IGMPv3 allows MX8400 to perform multicast joins and leaves to further simplify system design.
With nCompass Control, the MX8400 offers advanced control and monitoring features that allows for ease of use and maintenance – leading to savings through operational costs, time and labor.
The highly integrated unit facilitates the need for fewer units and thus increases the overall system reliability.
(MX8400/HWO/4ASI or MX8400/HWO/8ASI)
· Additional power supply
Transport Stream Inputs (Standard)
|Dual port Gigabit Ethernet input with two Electrical Ethernet ports (RJ45) ASI transport stream, two input ports|
|Reference Inputs||HSYNC: two redundant input ports|
Transport Stream Outputs (Standard)
|Gigabit Ethernet: two Electrical Ethernet ports ASI transport stream, four output ports|
|Reference Outputs||HSYNC, two redundant output ports|
||Two 10/100 BaseT Ethernet ports for Control and additional two 10/100 BaseT ports for CA interfacing
Control and set-up via nCompass Control
|Multiplexing||From one to eight independent multiplexed outputs from a single unit Multiple input and output data ports
Transport stream rates up to 250 Mbps Up to 8192 PIDs supported per output TS Full PID remapping
Input component tracking PID monitoring
MPTS and SPTS support
Removal of ±60 mS of IP network jitter for each incoming TS Support for IGMP v3 protocol
Reflex Statistical Multiplexing of MPEG-2 SD and HD Reflex statistical multiplexing of MPEG-4 AVCSD and HD Supports up to 24 different Simulcrypt DVBCA
|Diagnostics||Monitoring and redundancy via nCompass Control by MediaKind Remote monitoring and diagnostics via SNMP|
Physical and Power
|Dimensions (W x D x H)||440 x 543 x 89 mm (17.5” x 21.5” x 2RU)|
|Approximate Weight||9 kg (20 lbs)|
|AC wide ranging 100 VAC to 120 VAC or 220 to 240 VAC
50 Hz to 60 Hz nominal
|Power Consumption||80 Watt nominal (without any options fitted)|
|Operating Temperature||0°C to 45°C (32°F to 113°F)|
|Relative Humidity||5% to 90%|