ARRIS C4™

Kontroler modemów kablowych DOCSIS / EuroDOCSIS 3.0

    Zapytaj o

    ARRIS C4™

    Opis produktu ARRIS C4™

    Cable operators require quality and reliability to compete in today’s voice and data arena. The ARRIS C4 CMTS enables operators to offer world-class performance for advanced, carrier-grade voice, high-speed data, and IPTV services. Highly-reliable C4 solutions reduce CAPEX with a highly economical cost-per-port and low operational cost. The C4 CMTS reduces OPEX and improves ROI with a compact footprint, low power consumption, and minimal cooling requirements which allow the unit to be placed in existing headends and hubs without build out or additional infrastructure, extending headend life and maximizing capital investment. Designed with flexibility in mind, the C4 CMTS active components can be upgraded via software to stay current with changing service demands. The C4 CMTS provides operators tremendous flexibility of configuration and ease of operation while providing best-in-class reliability. Because the C4 CMTS offers full DOCSIS 3.0 upstream and downstream services including channel bonding, operators can configure and deliver high-speed and new convergent services efficiently, bringing increased revenue per customer and improved market responsiveness. The C4 CMTS positions operators to operate more profitably and compete more effectively by satisfying subscriber and corporate demand for new services, higher speeds, and superior service quality.

    • Meet bandwidth demands through unmatched CMTS efficiency, flexibility, quality, and performance
    • Extend headend life while increasing CMTS capacity, reliability, and responsiveness
    • Capture market opportunities with a CMTS providing best-in-class availability, performance, and scalability
    • Achieve 99.999% availability with hitless fail-over of all major CMTS components
    • Protect investment now for the future with DOCSIS 3.0

    Specyfikacja techniczna

    24U CAM (24 DOCSIS 3.0 Upstream Receivers) The 24U CAM is a new design using the latest DOCSIS 3.0 PHY and MAC silicon and enhanced ARRIS FPGAs for high performance. The 24U CAM provides 24 DOCSIS 3.0 upstream receivers shared across the eight available F connectors. Release 8.0 supports up to 9+1 hitless RF sparing of the 24U CAM. The Physical Interface Card (PIC) is the same as used
    with the 12U CAM, so customers can deploy the 24U CAM with minimal of cabling changes.
    Hitless RF Redundancy Expansion for 16D CAMs and XD CAMs  C4 CMTS Release 8.0 expands support for Hitless RF Redundancy for 16D CAMs and XD CAMs to 8+1 in parallel with the introduction of the 24U CAM in order to more „exibly leverage the density enhancements on the C4 CMTS.
    Hitless RF Redundancy Expansion for 16D CAMs and XD CAMs  C4 CMTS Release 8.0 expands support for Hitless RF Redundancy for 16D CAMs and XD CAMs to 8+1 in parallel with the
    introduction of the 24U CAM in order to more „exibly leverage the density enhancements on the C4 CMTS.
    IPv6 Support for TFTP Enforce and Dynamic Shared Secret  These cable modem con!guration !le security mechanisms provided by the C4 CMTS for IPv4-addressed cable modems
    have been extended to provide the same security for cable modems with IPv6 management addresses.
    Fully Quali!ed Domain Name (FQDN) Support for Static IGMP Joins  The FQDN for Static IGMP Joins feature allows the CMTS to accept an FQDN as the IP multicast source address for
    statically provisioned IGMP con!gurations. The CMTS will resolve the FQDN via DNS and re-initiate IGMP joins as needed.
    Multicast CAC for IP Video (Phase 1)  The Multicast CAC (Phase 1) feature extends the existing voice-oriented Connection Admission Control function to
    multicast service „ows (intended for IP Video applications).
    Enhanced Control-Plane Overload Monitoring  The Enhanced Control-Plane Overload Monitoring feature provides a new SNMP MIB for monitoring the overload status
    of the C4 control plane, including a new trap for overload indication, at both the module and system levels.

    Usługi utrzymania systemów V-AID

    Oferta usług utrzymania systemów obejmuje 6 pakietów usług pomocy technicznej VECTOR SOLUTIONS:V-AID Service / EW / NBD / NBD+EW / 24h / 24h+EW.Umożliwiają one wykorzystanie potencjału Firmy VECTOR w zakresie codziennego wsparcia technicznego, rozwiązywania problemów, szybkiego reagowania na problemy krytyczne w sieci oraz utrzymania systemu na najwyższym poziomie wydajności oraz planowania rozwoju sieci.

    Inni przeczytali także: